AUTOCLAVE STEAM STERILIZER LABTECH

Steam Sterilizer

Class B Sterilization. Pre Post Vacuum System

Feature

Sterilization temperature 110°C to 135°C EN-13060-2 class B sterilization cycle
Pre Vacuum-water filling-heating-sterilizing-ventilation-post vacuum drying-end cycle
Pre-vacuum and post vacuum Drying system
Pre-vacuum for effective air removal that results in increasing sterilization performance
Post-vacuum for drying with remaining steam removal
Microprocessor PID program controller with self  auto-tuned and LCD monitor
7 pre-programmed cycles as 2 wrapped, 2 unwrapped liquid, Bowie-disk and 1 user programmable.
Full automatic operation system 
Easy operation with full automatic cycle by microprocessor, from beginning to end cycle.
Self-diagnostic and Safety system
In case of any malfunction, it alarms and displays error codes for easy maintenance, being stop working with automatic ventilation process for safety purpose
Air filtration cooling system
For the process of drying cycle, 0.2µm HEPA filtered clean air flows into the chamber in order to protect air contamination and cool down below 60°C
Flushing cycle sterilization system
Can be supplied as operational order
Safe and Efficient water supply system
Automatic water supply mechanism which supplies fixed volume of water to the chamber
for maximum efficiency
Automatic and manual door lock system
When the sliding handle is entered into the locking ring, the door automatically locks after two second.
The door can be manually opened and locked using the locking wheel system.
Space saving compact design
Maximize working capacity with square chamber and minimize foot space with dedicated engineering design.
Safety Mechanism
– Over pressure release valve
– Over temperature protector with Thermostat
– Higher temp set protector by Digital high alarm limit
– Visible and Audible alarm system
– Automatic dual door locking system

Description

AUTOCLAVE STEAM STERILIZER LABTECH

AUTOCLAVE STEAM STERILIZER LABTECH

Autoclave adalah alat yang digunakan untuk mensterilkan peralatan dan perlengkapan dengan menundukkan material untuk uap tekanan tinggi jenuh pada 121 °C – 135°C selama sekitar 15-20 menit, tergantung pada ukuran beban dan isi.

Penurunan tekanan pada autoklaf tidak dimaksudkan untuk membunuh mikroorganisme, melainkan meningkatkan suhu dalam autoklaf. Suhu yang tinggi inilah yang akan membunuh microorganisme. Autoklaf terutama ditujukan untuk membunuh endospora, yaitu sel resisten yang diproduksi oleh bakteri, sel ini tahan terhadap pemanasan, kekeringan, dan antibiotik. Pada spesies yang sama, endospora dapat bertahan pada kondisi lingkungan yang dapat membunuh sel vegetatif bakteri tersebut.

Endospora dapat dibunuh pada suhu 100 °C, yang merupakan titik didih air pada tekanan atmosfer normal. Pada suhu 121 °C, endospora dapat dibunuh dalam waktu 4-5 menit, di mana sel vegetatif bakteri dapat dibunuh hanya dalam waktu 6-30 detik pada suhu 65 °C.

MODEL:   LAC-2011SN     LAC-2021SN    LAC-2031SN

 

Silahkan klick tulisan merah dibawah ini!!!

 

 

 

 

CATALOG AUTOCLAVE 2022

 

 

 

Reviews

There are no reviews yet.

Be the first to review “AUTOCLAVE STEAM STERILIZER LABTECH”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

WhatsApp WhatsApp us