Walk-in Environmental Chamber

A walk-in chamber (also known as a walk-in environmental or climatic chamber) is a large-scale enclosure used to simulate and maintain specific environmental conditions—such as temperature, humidity, and light—to test the durability, stability, and performance of products or materials

Plant Growth, Tissue Culture, Seed Germination, Environmental Stability Chamber

ECO -Green Real Environment of Earth, Temperature : 4C to 60C, Humidity: 30% to 98% RH, Wind Velocity: 0.3m/sec-1.0m/sec, Universal Application : for Environmental Condition of Earth Planet.

CFC Free

Model Available:

  1. LWG-3000RT : 2880 Liter
  2. LWG-4000RT: 4080 Liter
  3. LWG-6000RT: 6120 Liter

Description

Walk-in Environmental

Feature

Heavy – Duty Mechanical Design

  • Manufactured for completed sealed chamber structure
  • Easy to move and install with sturdy foot master
  • HEPA filtered clean air is supplied into the chamber for culture and growth, installed at roof top
  • Perfect uniformity air circulation chamber structure, with air velocity control technology

Non-CFC/HCFC Refrigeration System

CFC / HCFC – free Hermetically sealed compressor and eco – friendly refrigerant gas are used for compliance with the New Environmental Regulation

Selection of refrigeration units for Installation

  • Built-in refrigeration unit of chamber
  • Exterior connection refrigeration unit at out door
  • Air cooled condensing system
  • Water  cooled condensing system

All-in-one Controller that integrates Monitoring and Recording Functions

  • Reliable Hardware and Software
  • 5.7 inch TFT LCD touch screen with dust – proof controller

Automatic water supply system

Distilled water or de – ionized water with water purifier is supplied by built-in reservoir at chamber

Specification

MODEL LWG-3000RT LWG-4000RT LWG-6000RT
Dimensions

(W x D x H mm)

Inner 1200x1200x2000 1200x1700x2000 1800x1700x2000
Outer 2000x1600x2540 2000x2130x2540 2745x2133x2540
Capacity 2880ℓ 4080ℓ 6120ℓ
Internal usable area (m²) 1.44 m² 2.04 m² 3.06 m²
Temperature Range 4°C to 60°C (Light Off) / 10°C to 60°C (Light On)

Set Accuracy ±0.01°C / Uniformity : ±1.0°C at 25°C

Humidity Range 30% to 95% RH (Light off) / 30% to 85% RH (Light on)

Set accuracy ±1% RH / Uniformity : ±2% to 3% at 24%

Electronic Sensor (free of drying a wet and good response time)

Evaporation by Fan with Heater and automatic water supply

Controller Microprocessor PID Multi-Function Controller for recorder data, program and alarm information
Display Graphic Display of set point and actual performance
Illumination 0 to 35000 Lux (Option)
Work Light Vapor proof fluorescent lamp
Material Interior Stainless steel with polished finish
Exterior Epoxy powder coated EGI Steel
Door Two doors with four of viewing windows
Refrigeration    System Selectable Air cooled of water cooled condenser / Built-in at chamber / of External Installation
Air Flow 2 sets of sirocco fan (200W), HEPA filtered air supply
Safety Switch-off after alarm for overheating, water empty, current leak, over current breaker
Electric Supply 110V 60Hz or 220V 50/60Hz or 3800V 50/60Hz, 3Phase / 4Wires

Remark: Temp 4°C can be reacted without lighting      Option: Light bank under each shelf, LED special Lamps

Reviews

There are no reviews yet.

Be the first to review “Walk-in Environmental Chamber”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.