JUAL SOLVENT GAS SENSOR MACVIEW
JUAL SOLVENT GAS SENSOR MACVIEWJUAL SOLVENT GAS SENSOR MACVIEWJUAL SOLVENT GAS SENSOR MACVIEW

JUAL SOLVENT GAS SENSOR MACVIEW

5 (1 votes)

share

MacView Solvent   MacView Solvent Gassensor The MACView® Solvent is a measurement system for measurement of harmful gasses or vapours. The MACView® Solvent can…
stock indent
Rp

MacView Solvent

 

MacView Solvent Gassensor

The MACView® Solvent is a measurement system for measurement of harmful gasses or vapours. The MACView® Solvent can display, register the measured concentrations and alarm external, if needed. The principle is based on a solid-state sensor which can measure various volatile organic compounds. The advantage of this solid-state sensor compared to other measurement principles is the longer lifetime. For the MACView® Solvent is a whole array of different sensors available for various components. The MACView® Solvent registers i.a. the following components:
Acetone – Terpentine – Ethanol – Ammonia – Thinner – Methane – Benzene – Toluene – Xylene – Stoddard Solvent

MacView Solvent Gassensor

Display
The MACView® Solvent displays the measured values in ppm (parts per million) on the display. By this, these values are direct compareable with the MAC-value. This is the Maximal Allowed Concentration. When this MAC-value is exceeded it is possible to act immediately, for example by removing the cause. At the lower line, the status of the relais is shown.

MacView Solvent Gassensor

Alarming
The MACView® Solvent contains 2 relais. These relais can signal extern in an alarm situation. The relais can be set up in a menu seperately. An example application is the triggering of an alarm light or an accoustical signal. One relais can be used for alarming while the other relais is used for triggering a fan. Thus the fan works only if needed, which saves energy.

MacView Solvent Gassensor

Registration
In addition to the displaying for control and alarming, it is possible to manage the data of the measurements in a database. This is done by use of using the optional software, the MACregister® software. It is possible to show the total course of measurements. From the gathered data, too high concentrations can be mapped out. With the MACregister® software it is possible to set how many measurements should be made within a given time. With this software it is also possible to alter the settings of the MACView® Solvent direct from the PC and to read the measurements real-time. The measurement values can be printed in a report, finally.

TECHNICAL SPECIFICATION

 

Housing material

aluminium

Weight, probe included

1095 gramme

Dimensions

61 x 116 x 189 mm

Length of probe

192 mm

Warming-up time

120 sec.

Signaling / Alarming

ppm and hysteresis adjustable per relais

Displaying

using back-lit LCD display with 2 rows x 16 characters

Acknowledgement alarm

by use of reset pushbutton

Communications to PC

via an RS232-cable

Outputs

– 2 relaisoutputs (up to 250 VAC switchable separately)
– 1 analoge output 0-10 V or 4-20 mA (at choice)

Units of MAC-value on display

parts per million (ppm)

Fastening

Read-out unit and sensor can be fastened to the wall together or apart easily.

Protection classification read-out unit

IP65

Accuracy probe

± 1%

Short-term stability probe

1%

Long-term stability probe > 1 year

± 2%

Approval

CE

Options

Optiional, the MACView® Solvent can be delivered with a standalone measurement head instead of the probe.

 

 

Silahkan klick tulisan merah dibawah ini!!!
SILAHKAN DOWNLOAD CATALOG MacView Solvent KAMI

Detail Produk

Kategori : GAS MEASUREMENT

MacView Solvent

 

MacView Solvent Gassensor

The MACView® Solvent is a measurement system for measurement of harmful gasses or vapours. The MACView® Solvent can display, register the measured concentrations and alarm external, if needed. The principle is based on a solid-state sensor which can measure various volatile organic compounds. The advantage of this solid-state sensor compared to other measurement principles is the longer lifetime. For the MACView® Solvent is a whole array of different sensors available for various components. The MACView® Solvent registers i.a. the following components:
Acetone – Terpentine – Ethanol – Ammonia – Thinner – Methane – Benzene – Toluene – Xylene – Stoddard Solvent

MacView Solvent Gassensor

Display
The MACView® Solvent displays the measured values in ppm (parts per million) on the display. By this, these values are direct compareable with the MAC-value. This is the Maximal Allowed Concentration. When this MAC-value is exceeded it is possible to act immediately, for example by removing the cause. At the lower line, the status of the relais is shown.

MacView Solvent Gassensor

Alarming
The MACView® Solvent contains 2 relais. These relais can signal extern in an alarm situation. The relais can be set up in a menu seperately. An example application is the triggering of an alarm light or an accoustical signal. One relais can be used for alarming while the other relais is used for triggering a fan. Thus the fan works only if needed, which saves energy.

MacView Solvent Gassensor

Registration
In addition to the displaying for control and alarming, it is possible to manage the data of the measurements in a database. This is done by use of using the optional software, the MACregister® software. It is possible to show the total course of measurements. From the gathered data, too high concentrations can be mapped out. With the MACregister® software it is possible to set how many measurements should be made within a given time. With this software it is also possible to alter the settings of the MACView® Solvent direct from the PC and to read the measurements real-time. The measurement values can be printed in a report, finally.

TECHNICAL SPECIFICATION

 

Housing material

aluminium

Weight, probe included

1095 gramme

Dimensions

61 x 116 x 189 mm

Length of probe

192 mm

Warming-up time

120 sec.

Signaling / Alarming

ppm and hysteresis adjustable per relais

Displaying

using back-lit LCD display with 2 rows x 16 characters

Acknowledgement alarm

by use of reset pushbutton

Communications to PC

via an RS232-cable

Outputs

– 2 relaisoutputs (up to 250 VAC switchable separately)
– 1 analoge output 0-10 V or 4-20 mA (at choice)

Units of MAC-value on display

parts per million (ppm)

Fastening

Read-out unit and sensor can be fastened to the wall together or apart easily.

Protection classification read-out unit

IP65

Accuracy probe

± 1%

Short-term stability probe

1%

Long-term stability probe > 1 year

± 2%

Approval

CE

Options

Optiional, the MACView® Solvent can be delivered with a standalone measurement head instead of the probe.

 

 

Silahkan klick tulisan merah dibawah ini!!!
SILAHKAN DOWNLOAD CATALOG MacView Solvent KAMI

Tags: ,

Tulis Komentar Anda

Semua kolom wajib diisi *

This site uses Akismet to reduce spam. Learn how your comment data is processed.