TRANALAB Electric Hot Plate

Sample baking, drying and sample digestion test, is a necessary tool for geological, metallurgical, environmental protection, agriculture, grain and cooking oil, forestry, food, medical and health, biochemical and other laboratories, as well as teaching and research. Sample digestion before chemical analysis of soil, feed, plants, seeds, heavy metals, ore. It is an ideal equipment of sample pretreatment for analytical instruments such as AA, ICP, ICP-MS, and atomic fluorescence. It can also be used for pretreatment and acid removal treatment of microwave digestion.

Hot plates are often used for food preparation, generally in locations where a full kitchen stove would not be convenient or practical. They can also be used as a heat source in laboratories. A hot plate can have a flat surface or round surface. Hot plates can be used for traveling or in areas without electricity.

Add to wishlist

Description
Reviews (0)

Description

FEATURES:

Corrosion resistance: Resist all kinds of acids: sulfuric acid, hydrochloric acid, nitric acid, hydrofluoric acid, perchloric acid, aqua regia and so on. Resist Alkali and a variety of corrosive gases.
High temperature resistance: Max. temperature 350 ℃. (Plate temperature)
Temperature uniformity: The temperature difference of each point on the surface doesn’t exceed ±2℃. Homogeneous batches of specimens (dozens of beakers) can reach boiling point at the same time.
Temperature control accurate: Can adjust temperature as desired, PID adjustment, temperature control accuracy: ±0.1℃.
Fast temperature rising: the time for room temperature rising to Max. temperature doesn’t exceed 40 minutes, and the mean value is 6.9 seconds/℃.
No pollution: The plate hardness: Vickers hardness 20, density 3.02, no scratches, no dropping slags.
Temperature measuring by the plate: The temperature displayed by the instrument is actual temperature of the plate surface (operating temperature).
Two heat zones: The Max. temperature of A main heating zone is 350 ℃, and Max. temperature of B secondary heating zone is 210 ℃.
Shell material: High-quality ABS plastic wrap angle.
Reuse: The undamaged plate system can be reused.
Safety of use: Multilayer insulation protection, in case of equipment failure, the alarm will be light and sound and stop work immediately.work immediately.

SPECIFICATION:

Model	TRANALAB (TR-EHP46-1)	TRANALAB (TR-EHP34-1)
Input voltage（V）	220	220
Operating frequency（Hz）	50	50
Power（W）	4000	2200
Working current（A）	18	12
Max. Temperature（℃）	350	350
Temperature control accuracy（℃）	±0.1	±0.1
Temperature control mode	PID	PID
Main heat zone sizes（mm）	400×600	300×400
Secondary heat zone size（mm）	400×60×2＋710×60×2	300×60×2＋510×60×2
Working system dimensions LWH（mm）	712×625×145	520×550×145
Commanding system dimensions LWH（mm）	220×420×145
Weight（kg）	46	27