The NITRO-GEN generator was developed with Organomation’s nitrogen evaporators in mind to provide nitrogen generation for sample concentration. The generator is lightweight and easy to set up, requiring only a source of compressed air to run. This unit is an ideal choice for labs with an in-house compressed air source.
The generator uses a hollow-fiber membrane to convert compressed air to a stream of 95-99% pure nitrogen gas. The hollow-fiber membrane consists of a series of narrow, semipermeable tubes in a porous membrane. As compressed air travels through the fibers, oxygen and water vapor permeate the membrane and are vented off, leaving a steam of high purity nitrogen gas. At up to 99% purity, the resulting nitrogen gas stream can be used in a variety of sample preparation applications.
The NITRO-GEN 20 produces up to 20 L/min of nitrogen gas and is recommended for evaporation of up to 48 sample positions.
|Instrument Catalog Number||NA1955|
|Flow Rate||Up to 20 L/min|
|Output Pressure||Adjustable 0 – 100 psi|
|Noise Level||Negligible (< 40 dBA when connected to an instrument)|
|Overall Dimensions (w x d x h)||9.5 x 8 x 19.5 in
241 x 203 x 495 cm
|Warranty Term||1 Year|
|Inlet Air Conditions|
|Max Inlet Pressure||150 psi
|Particulates||≤ 0.01 µm|
|Max Oil Vapor Content||< 0.01 mg/m3
< 0.01 ppm (w)
|Relative Humidity||< 100% (non-condensing)|
|Heating Device Specs|
|Air Quality||Clean air without contaminants|