Description

Nitrogen Generator NI-GEN LCMS 40-1 Nitrogen Generator
DESCRIPTION
The NiGen LCMS 40-1 from Italian gas generator manufacturer Claind is designed to satisfy the needs of the LC-MS and sample preparation fields. The NiGen 40-1 is compatible with all Organomation nitrogen evaporators up to 100 sample positions, along with all LC-MS analyzers on the market. It is equipped with a fully integrated oil-free compressor, eliminating the need for a separate source of compressed air. Special soundproof casing keeps the noise to a minimum while the compressor is running.
The NiGen 40-1 relies on Pressure Swing Adsorption (PSA) technology to separate nitrogen from the air. The unit uses molecular sieves to remove oxygen, water, and trace hydrocarbons, leaving a stream of high purity nitrogen gas. Compressed air and generated nitrogen are stored in tanks of up to 50 liters each, allowing for less frequent cycles of the internal air compressor.
OUR STRONG PRODUCTS :
- Convenient : Integrated air compressor eliminates the stress of sourcing an appropriate compressor to run your generator
- Low Maintenance: Compressor maintenance required only after 16,000 working hours
- Quiet: Less than 50 decibels in standby mode
- Reliable: High-capacity gas storage tanks reduce the frequency of compressor cycles, reducing noise levels and wear on the motor
SPECIFICATION:
Instrumental Name | NiGen LCMS 40-1 |
Instrument Catalog Number | NA1990 |
Flow Rate | Up to 38 NL/min |
Technology | PSA |
Output pressure | 0 – 100 psi 0 – 7 bar |
Electrical Requirements | 125 V / 25 Amp / 60 Hz |
Total Wattage | 1600 W |
Index of Protection | IP20 |
Noise Level | < 50 dBA during standby < 65 dBA with compressor running |
Overall Dimensions (w x d x h) | 17.3 x 43.3 x 52 in 44 x 110 x 132 cm |
Weight | 485 lbs. 220 kg |
Warranty Term | 2 Years |
Environmental Operating Conditions | |
Temperature | 41-95 °F 5-35 °C |
Humidity | ≤90% |
Altitude | 0 – 2000 m above sea level |
Reviews
There are no reviews yet.