15 MICROVAP Nitrogen Evaporator


  1. Adjustable flow meter
  2. Digital temperature control
  3. High temperature limit switch
  4. 4-inch x 19-gauge needles
  5. Nitrogen filter
  6. Anodized aluminum heat block


  1. 220V wiring harness
  2. Z-Purge/intrinsically safe purge case
  3. Manifold and stand only; no heating platform


  1. Nitrogen generator
  2. Pressure reducing regulator, 30-160 psi in, 0-30 psi out
  3. Pasteur pipette
  4. adapters
  5. 15 position conversion kit
  6. 96 well plate conversion kit
  7. Various needles sizes and gauges


15 MICROVAP Nitrogen Evaporator
15 MICROVAP Nitrogen Evaporator

The 15 position MICROVAP benchtop evaporator is intended for small batch solvent evaporations, such as concentrations of sample groups in microcentrifuge tubes. It offers an effective and compact evaporation solution for samples in life science and pharmaceutical laboratories.

Each MICROVAP uses minimal hood space while providing optimal temperature control for high and low boiling point solvents. The 15 position MICROVAP comes standard with stainless steel luer lock hubs and 4-inch x 19-gauge stainless steel needles for easy removal.

Up to 15 samples can be accommodated at once, and the instrument comes customized for one sample size with an outside diameter of 10-22mm. If multiple sample sizes will be used with the instrument, inserts can be purchased for each additional sample size.

Each of the sample blocks and inserts are customized to your samples for a precise fit and optimum heat transfer.

Since these inserts and heat blocks are made-to-order, we will request that you deliver us three sample vials for each unique vial size upon placing an order for a 15 Position MICROVAP parallel evaporator. In situations where shipping sample vials to Organomation is not possible, we need precise measurements of your sample vials to be taken as illustrated in this guide.

The digital temperature controls and solid aluminum heating unit provide uniform heat up to 130°C with temperature accuracy of +/- 2°C. A version without heat is available for evaporations that will be performed at ambient temperature.


Instrumental Name 15 Position MICROVAP
Heater Type Dry block None
Instrument Catalog Number 11815 11815-O
Number of Sample Positions 15 15
Overall Dimensions
(w x d x h)
10.0 x 12.5 x 14.5 in
25.4 x 31.75 x 43.18 cm
8.5 x 13.0 x 14.5 in
21.6 x 33.0 x 35.6 cm
Sample Holder Layout Rectangular Rectangular
Gas Manifold Layout 3 x 5 Array 3 x 5 Array
Center to Center Spacing
Between Positions
1.0 in
2.54 cm
1.0 in
2.54 cm
Heat Block Dimensions
(w x d)
3.5 x 5.125 in
8.9 x 13 cm
3.5 x 5.125 in
8.9 x 13 cm
Test Tube Diameter 10-22 mm OD 10-22 mm OD
Gas Flow Control Single toggle valve Single toggle valve
Gas Flow Meter Range 0-25 L/min 0-25 L/min
Stainless Steel Needles
(Length & Gauge)
4.0 in x 19 ga
102 mm x 19 ga
4.0 in x 19 ga
102 mm x 19 ga
Hoist Assembly Manual Manual
Standard Gas Input Range 20-30 psig 20-30 psig
Gas Input Range with Optional Pressure Reducing Regulator 30-160 psig 30-160 psig
Heating Device Specs
Model Number 18103 N/A
Outside Dimensions
(w x d x h)
10.0 x 9.75 x 3.5 in
25.4 x 24.765 x 7.6 cm
Total Wattage 180 W N/A
Temperature Range 40-130 °C Ambient
Temperature Controller Type Digital Electronic
with LED Display
Controller Accuracy +/- 2 °C N/A


There are no reviews yet.

Be the first to review “15 MICROVAP Nitrogen Evaporator”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

WhatsApp WhatsApp us